|
Semi Automatic
Overflow Filler
APPLICATION:
Liquids with low to medium viscosity and
with no solid particulates exceeding
1/16". The Overflow Filler is the
superior method for filling very foamy products.
EXAMPLES:
Sauces, syrups, light gels and shampoos,
foamy cleansers and chemicals, water and other
non-carbonated aqueous beverages.
OPERATION:
Simple foot switch or pushbutton begins
filling cycle; fill heads come down to seal mouth of
container; pump then runs for period determined by
timer. After fill sequence, heads remain over
container mouth for programmed "dwell"
time to reduce any foam. Fill head then rise
and filled bottles are removed. Semi Automatic
Overflow Filler can be mounted with a hand held
capper.
ADVANTAGES:
Lower cost option ($10,880) for low
production needs (< 40 BPM), easy to clean, easy
to operate, flexible for wide range of
products. 110V/air operated; can be easily
installed anywhere.
|
This machine can be upgraded
to
fully automatic operation.
No Service Call Required.
(see bottom of page)
|
|
Semi Automatic
Positive Displacement Filler
APPLICATION:
Fills almost any liquid with nearly any
viscosity including large particulates.
EXAMPLES:
Sauces, syrups, salsa, heavy gels and
shampoos, cosmetic creams, oils, juices.
OPERATION:
Operator enters data for desired fill
volume. When foot switch is pressed, machine
will dispense exact amount and then stop for next
cycle.
ADVANTAGES:
Low cost option ($8,400) for a single
head/low production rates (~ 20 BPM), easy to clean,
easy to perate, flexible for wide range of products.
110V/air operated; ready to run immediately.
(Hopper and stand are optional.)
Unit as shown priced at $9,715.
|
This machine can be upgraded
to
fully automatic operation.
No Service Call Required.
(see bottom of page)
|
|
Semi Automatic Peristaltic Filler
APPLICATION:
Small volume, precision fills of liquids
with viscosity lass than 2500 centipoises where
contamination and cleanup issues are critical.
EXAMPLES:
Essential extracts and oils, fragrances,
chemical and biomedical reagents, dyes and paints.
OPERATION:
Operator enters data for desired fill
volume. When foot switch is pressed, machine
will dispense exact amount and the stop for next
cycle.
|
|
|
Fully Automatic
Upgrade
This semi automatic overflow filler
has been upgraded to an automatic system wherein a
single operator can produce well over 1000 filled
and capped containers per hour. The system
above includes a bottle feeder (unscrambler),
automatic indexing 10' long conveyor, hand
held capper, and a bottle accumulator. If
more conveyor and hand held cappers are added,
production speed can increase an additional 20
containers per minute (average).
|
